36 Street no. 2, Quarter 2 Tel.: +84 (0)28 5402 9002 eMail: info@huynhbang.com |
|---|
JUMO offers the highest quality electrodes, transmitters, and controllers for water/wastewater engineering, highly-purified pharmaceutical water, CIP cleaning, and water for drinking, swimming pools, and aquariums.
Our sensors are designed and produced by JUMO, are available in both glass and plastic tube versions, using electrodes and/or membranes, or optical sensors.
As the official Representative and Exclusive Sales Agent of JUMO in Viet Nam, Huynh Bang can offer solutions for the following measurement applications:
- Ammonia
- Chlorine dioxide
- Total chlorine
- Free chlorine
- Concentration
- Conductivity
- Ozone
- Peracetic acid
- pH
- Redox
- Ultra-pure water
- Oxygen (dissolved)
- Turbidity
- Hydrogen peroxide
JUMO Sensor: Chlorine
Measuring cells for free chlorine, chlorine dioxide, ozone, hydrogen peroxide and peracetic acid (202630)
Features
- 2- or 3-electrode principle
- Easy calibration
- Integrated temperature compensation
- Proven measuring system
- Different measuring ranges are possible
Applications
- Drinking water disinfection
- Swimming pool disinfection
Specifications: Download here
Details: JUMO tecLine Cl2, Sensor for Free Chlorine
Description
These membrane-covered, amperometric measuring cells are used to measure the concentration of free chlorine, chlorine oxide or ozone in aqueous solutions (e.g. drinking water, swimming pool water, industrial water, process and cooling water).
The measuring cell for free chlorine can be used to measure the following anorganic chlorination agents: chlorine gas (Cl2), electrolytically generated chlorine, sodium hypochlorite (NaOCl, chlorine bleaching solution), calcium hypochlorite (Ca(OCl)2) or chlorinated lime (Ca(OCl)Cl).
The measuring cell can be used to measure chlorine dioxide from chlorite/chlorine and chlorite/hydrochloric acid plants.
The ozone measuring cell can be used to measure electrolytically generated ozone, for instance.
The electronics integrated in the measuring cells provides a temperature compensated 4...20 mA current signal. Calubration is carried out in a downstream device (indicator, controller, recorder, PLC, etc.).
The measuring cells can be directly connected to a suitable indicator and control device. The indicator/control device JUMO dTRANS Az 01 (data sheet 20.2550) is especially suitable to be combined with the measuring cells. It provides the voltage required for the supply of the measuring cell and allows for easy calibration of the measuring system.
JUMO Sensor: Conductivity
JUMO CTI-500 - inductive conductivity / concentration and temperature transmitter with switching contacts (202755)
Features
- Activation of up to four ranges
- Activation of up to four temperature coefficients
- Fast-response temperature probe
- Linear temperature compensation, natural water, own characteristic line (teach-in function)
- Operation via keypad / LC display or setup program
- Operating languages: German, English, French, Dutch, Spanish, Polish, Swedish, Italian, Portuguese
- Comfortable programming via setup program, plant documentation
- Dilution control
Specifications: Dowload here
Description
The device is used for measurement / control of the conductivity / concentration of fluid medium. The application is particularly recommended in medium, in which severe deposits by soiling, oil, grease or gypsum and calcium carbonate precipitations are to be expected. The integrated temperature measurement allows a precise and quick temperature compensation that is particularly important when measuring the conductivity. Additional functions allow the combined toggling of measuring range and temperature coefficient.
Two integrated switching outputs can be programmed freely for limit value monitoring of conductivity / concentration and / or temperature. Furthermore, alarm and control tasks (desalination) can be assigned.
Operation is carried out either via keypad and plain text graphical display (operating language can be toggled) or via a comfortable PC setup program. The display is visible by simply turning the case cover when installed in either vertically or horizontally routed pipework. The setup program can also be used to store and print out the device configuration data for machine documentation. To exclude tampering, the device can also be supplied without keypad / display. In this case, the setup program is required for programming.
The JUMO CTI-500 can be supplied as a combination device (transmitter and measuring cell in one device) or as a cable-connected transmitter/measuring cell version. The separated version is especially suited for systems subject to strong vibration and/or strong temperature radiation at the measuring location or for installation at locations that are difficult to access For use in open tanks/vessel or conduits/channels, immersion versions of max. 2000 mm are available.
JUMO Sensor: Sensor for pH
JUMO ecoLine / JUMO BlackLine pH single-rod electrodes (201005)
Features
- High-quality measuring probes
- Good value for money
- Glass / plastic shaft versions
- Variable fitting lengths
- Optionally available with fixed cable connection
Applications
- Drinking water monitoring and treatment
- Swimming pool technology
- Fish-keeping (also seawater)
- Greenhouse technology
- Lightly polluted industrial water, process water and waste water
- Hand-held measuring device
Specifications: Download here
Details: JUMO ecoLine / JUMO BlackLine pH single-rod electrodes
JUMO sensor: JUMO tecLine pH single-rod electrodes (201020)
Features:
- High-quality industrial electrodes
- Process / industrial applications
- Pressure resistant up to 10 bar
- Additional temperature probe can be integrated
- Different fitting lengths
Apllications:
- Industrial and communal water and waste water technology
- Measurements in suspensions and paints / lacquers
- Measurements in low ion fluids
- High-alkaline, high-temperature and sterilization processes
- Fluoride containing fluids and low temperature applications
Specifications: Download here
Details: JUMO tecLine pH single-rod electrodes
JUMO sensor: JUMO tecLine HD pH Combination Electrodes (201021)
Features:
- Especially robust industry electrodes for the most demanding applications
- For processes with increased pollutant and toxic loads as well as media containing oil
- For high process pressures up to 13 bar
- Wide temperature operating range up to 135 ° C
- Extensive PTFE ring diaphragm
- HA glass for use in strongly alkaline media
- With quality certificate
- Temperature probe can be integrated as an addition
- Integrated salt reserve
- Double chamber version with dual diaphragm partitioning
Apllications:
Chemical industry:
- Process water, high process pressures up to 13 bar, broad temperature range up to 135 ° C, and wide pH range from pH 0 to pH 14
Industrial wastewater engineering:
- Process wastewater, wastewater with highly contaminating media (presence of oil or electrode poisons)
Galvanic:
- Process water, media with electrode poisons (metal ions, complexing agents)
Power plants and waste incineration plants (flue gas scrubbing):
- Wide pH range of pH 0 to pH 14, presence of fine ash particles
Sugar industry:
- Constantly high temperature, presence of electrode poisons (e.g. sulfides)
Specifications: Download here
JUMO sensor: Sensor for drinking water and disinfection and swimming pool desinfection
JUMO sensor: JUMO tecLine ClO2 and O3, Sensor for Chlorine Dioxide and Ozone (202634)
Features:
- Two-electrode principle
- Easy calibration
- Integrated temperature compensation
- Proven measuring system
Apllications:
- Drinking water disinfection
- Swimming pool disinfection
Specifications: Download here
Details: JUMO tecLine ClO2 and O3, Sensor for Chlorine Dioxide and Ozone
JUMO sensor: JUMO tecLine TC - Sensor for Total Chlorine (202631)
Features:
- Three-electrode principle
- Easy calibration
- Integrated temperature compensation
- Proven measuring system
Apllications:
- Drinking water monitoring
- Swimming pool monitoring
Specifications: Download here
JUMO Sensor: Sensor for Turbidity Measurements
JUMO Sensor: JUMO ecoLine NTU - Optical Sensor for Turbidity Measurements (202670)
Features:
- Measuring method based on the 90 ° scattered light procedure according to DIN EN ISO 7027
- Entire measuring range 0 to 4000 NTU
- Four single measuring ranges adjustable as well as automatic measuring range detection
- Safe, digital measured value transmission
- High measuring accuracy, even for low turbidity
- Integrated temperature sensor
- Short response time
- Sensor is precalibrated prior to shipment
- Protection type IP68
- Operating temperature from 0 to 50 ° C
- Safe use when the corresponding fittings are used
- Safe measured value display in combination with display unit / controller JUMO AQUIS 500 RS (202569)
Customer benefits:
- Multitude of implementation options through wide measuring range
- Detection of both low and high turbidity
- Safe measured value transmission, even for long distances
- Simple startup on location through precalibrated sensor
- No spare parts necessary
- Low operating cost, long operating life
Apllications:
- Process monitoring in drinking water / wastewater treatment
- Municipal and industrial sewage treatment plants
- Water monitoring
- Fish farms
- Galvanic
- Process engineering plants
Specifications: Download here
Details: JUMO ecoLine NTU - Optical Sensor for Turbidity Measurements
JUMO dTRANS O2 01 - transmitter / controller for dissolved oxygen (DO) with separate operating unit (202610)
Features:
- Measurement of dissolved oxygen (DO) in aqueous solutions
- Safe 1-point calibration
- 2-wire transmitter (for basic and standard version)
- Electrical isolation of measurement signal (DO) and output signal (mA)
- Easy connection to an existing system (e.g PLC)
- Can be used as stand-alone system in maximum version
- Compensation of temperature, atmospheric pressure and salinity
- Further processing of the temperature of the medium is possible (separate Pt 1000
- or 2-wire transmitter)
- Setup program for comfortable transmitter configuration / documentation
- Easy, safe service by replacement of modules
- Background lighting (for maximum version)
Apllications:
- Communal and industrial wastewater treatment plants
- Drinking water monitoring
- Protection of water bodies
- Fish keeping / hatchery plants
- Technical processing plants
Specifications: Download here
Details: JUMO ecoLine O-DO - Optical Sensor for Dissolved Oxygen (DO)
JUMO Sensor: JUMO ecoLine O-DO - Optical Sensor for Dissolved Oxygen (DO) (202613)
Features:
- Suitable for display unit / controller according to T202569
- Greater calibration intervals due to lower drift behavior
- High measuring accuracy even for low concentrations
- Short response time
- No minimum inflow (no oxygen consumption)
Customer benefits:
- Low operating costs due to reduced maintenance requirements (no electrolyte changes and no polarization voltage)
- Greater calibration intervals due to lower drift behavior
Apllications:
- Municipal and industrial sewage treatment plants
- Drinking water monitoring
- Water protection
- Fish farming companies
- Process plants
Specifications: Download here
Details: JUMO ecoLine O-DO - Optical Sensor for Dissolved Oxygen (DO)
JUMO Sensor: Ammonia Sensitive Sensor
JUMO Sensor: Ammonia Sensitive Sensor (201040)
Features:
- Monitoring ammonia leakage in refrigeration plants
- Applicable for a medium temperature of at least -8 ° C
- Special PTFE membrane
- Easy replacement of membrane
Apllications:
- Refrigeration systems, oh. a. in
- Icerink is
- Cold storage
Specifications: Download here
Details: Ammonia Sensitive Sensor
