36 Street no. 2, Quarter 2 Tel.: +84 (0)28 5402 9002 eMail: info@huynhbang.com |
|---|
Mechanical Flow Meters
In Gear Flow Meters, enclosed, medium-filled cavities are created between the teeth and the housing. The flowing measured medium causes the gear pair to rotate freely and without braking.
Turbine Flow Meters measure with the aid of a high-precision turbine wheel. The medium flows against the turbine wheel in the axial direction and causes it to rotate.
In Helical Flow Meters, the volumetric flow of the fluid is measured by the screw wheel principle. Two screw spindles, which overlap, are located in the housing. Enclosed media-filled cavities are created between the spindle flanks and the housing.
The speed of the respective type of measurement is proportional to the flow rate and is picked up by transducers through the housing wall without contact.
Gear Flow Meters (ZHM)
Gear Flow Meters (ZHM) are volumetric flowmeters mainly used for lubricating and non-lubricating liquids. They are equally suitable for filled, viscous and abrasive media. Only high quality stainless steels are used to manufacture the gear flow meters, which can withstand even corrosive media. The combination of different gear dimensions and modules allows a wide range of sizes, which can cover an enormous measuring range. Short response times, very dynamic behavior and high measuring accuracy ensure precise regulation and control of volume flows within demanding applications.
Turbine Flow Meters (HM)
Turbine Flow Meters (HM) are used to measure continuous and discontinuous volume flows. They are mainly used for lubricating and non-lubricating media. In particular, they are suitable for low- and medium-viscosity fluids, such as water, emulsions, glycol mixtures and light oils. Only high-quality stainless steels that can withstand even corrosive media are used to manufacture the turbine flow meters. The combination of a wide variety of turbine wheel diameters and vane geometries enables a broad range of sizes that can cover an enormous measuring range.
Helical Flow Meters (SRZ)
Helical Flow Meters (SRZ) are volumetric flow meters that are mainly used for highly viscous, abrasive, filled as well as lubricating and non-lubricating media. Polyurethane, polymers and viscous materials, but also greases and oils of all kinds are among them. Thanks to its design, temperature fluctuations and the resulting change in medium viscosity have only a marginal effect on measurement accuracy. Only high-quality stainless steels that can withstand even corrosive media are used to manufacture the spindle flowmeters. Short response times, very dynamic behavior and high measuring accuracy ensure precise regulation and control of volume flows within demanding applications.
