TRICOR Coriolis Mass Flow Meter for High Pressure Gas Applications

TRICOR Coriolis Mass Flow Meter for High Pressure Liquid Applications

Nominal Flow Rate

*@ 20°C air, pressure drop 10 bar:

• 394 kg/h @ 1,050 bar [14.5 lb/min @ 15,200 psi]
• 362 kg/h @ 690 bar [13.3 lb/min @ 10,000 psi]
• 316 kg/h @ 414 bar [11.6 lb/min @ 6,000 psi]

*@ 20°C H2, pressure drop 50 bar:

• 254 kg/h @ 1,050 bar [9.30 lb/min @ 15,200 psi]
• 240 kg/h @ 875 bar [8.80 lb/min @ 12,690 psi]
• 222 kg/h @ 690 bar [8.15 lb/min @ 10,000 psi]
• 184 kg/h @ 414 bar [6.75 lb/min @ 6,000 psi]

@ 850 kg/m3: (Pressure Drop max.2 bar)

• 180 kg/h @ 1 cSt [6.6 lb/min @ 1 cSt]
• 150 kg/h @ 10 cSt [5.5 lb/min @ 10 cSt]
• 65 kg/h @ 30 cSt [2.4 lb/min @ 30 cSt]

Pressure Rating

• TCMH 0450-HC-SPPS (-SPMS): 1,050 bar [15,200 psi]
• TCMH 0450-HC-SRPS (-SRMS): 690 bar [10,000 psi]
• TCMH 0450-HC-SSPS (-SSMS): 414 bar [6,000 psi]

• TCMH 0450-HC-SPOS: 1,050 bar [15,200 psi]
• TCMH 0450-HC-SROS: 690 bar [10,000 psi]
• TCMH 0450-HC-SSOS: 414 bar [6,000 psi]

Accuraccy

• Flow: ±0.5 % of flow rate
• Mass Repeatability: ±0.5 % of flow rate
• Zero Stability: 0.45 kg/h [0.0165 lb/min]]
• Temperature: ±1 °C ±0.5 % of flow rate [±1,8 °F ±0.5 % of flow rate]

• Flow: ±0.5 % of flow rate
• Mass Repeatability: ±0.1 % of flow rate
• Zero Stability: 0.34 kg/h [0.16 kg/h] 0.012 lb/min [0.005 lb/min]
• Temperature: ±1 °C ±0.5 % of flow rate [±1,8 °F ±0.5 % of flow rate]

Operating conditions process

• Process Temperature Range: -40 °C ... +100 °C [-40 °F ... +212 °F]
• Medium: Gas
• Pressure Effect on Sensitivity: 0.0002 % / bar [0.000014 % / psi]

• Process Temperature Range: -40 °C ... +100 °C [-40 °F ... +212 °F]
• Medium: Liquid
• Pressure Effect on Sensitivity: 0.0002 % / bar [0.000014 % / psi]

Operating condistions enviroment

• Ambient Temperature: -40 °C ... +70 °C [-40 °F ... +158 °F]
• Relative Humidity: max. 95 %

• Ambient Temperature: -40 °C ... +70 °C [-40 °F ... +158 °F]
• Relative Humidity: max. 95 %

Material (Wetted Parts)

• Tubes: 1.4404 [AISI 316L] or Sandvik Alloy HP160
• Case: 1.4404 [AISI 316L]
• Flow Splitter: 1.4404 [AISI 316L]

• NACE MR0175/MR0103
• Tubes: 1.4404 [AISI 316L]
• Case: 1.4404 [AISI 316L]
• Flow Splitter: 1.4404 [AISI 316L]

Burst protection

• Rupture Disc: G1/2”

• Rupture Disc: G1/2”

Connectivity

• Flow Meter: 3/8” Autoclave (MP) (others on request)
• Signal Cable Connection: Push-Pull connector
• For triple Ex approval (Ex3)

• Flow Meter: 3/8” Autoclave (MP)
• Signal Cable Connection (For triple Ex approval (Ex3)): Push-Pull connector

Datasheet

• TCMH 0450 Gas

• TCMH 0450 Liquid