RED-Y SMART PRESSURE CONTROLLER - Huynh Bang Company

36 Street no. 2, Quarter 2
An Phu Ward, Thu Duc City
Ho Chi Minh City, Vietnam

Tel.: +84 (0)28 5402 9002
Fax: +84 (0)28 5402 9004

eMail: info@huynhbang.com

Digital Pressure Controllers for Gases with integrated Flow Measurement

The electronic red-y smart pressure controller combine the reliable technology of our digital mass flow controllers with electronic pressure control.

The devices automatically control a predefined process pressure and at the same time measure and/or limit the flow rate. On-the-fly switching between pressure control and flow control offers maximum flexibility.

PDF Datasheet

CORE FEATURES

√ 1 Device - 3 Funtions

√ Instrument Versions

√ It's red-y smart

√ Analog & Digital

√ Operating Status Indication

√ get red-y Software

√ Options

√ 3-Years Warranty

Technical Specifications red-y smart pressure controller

MEASURING & CONTROL RANGES PRESSURE
Pressure control	Absolute, differential or gauge pressure Standard measuring ranges from 30 mbar up to 10 bar (graded) Turndown ratio: 1 : 100
Back pressure control	Absolute, differential or gauge pressure Standard measuring ranges from 30 mbar up to 10 bar (graded) Dynamic range depending on the application
MEASURING RANGES FLOW
Air/Full scale freely selectable	Body size ¼” from 0 … 25 mln/min to 0 … 60 ln/min Body size ½” from 0 … 60 ln/min to 0 … 450 ln/min
TURNDOWN RATIO & ACCURACY FLOW
“Standard”	Accuracy: ± 1.0% of full scale* Turndown ratio: 1 : 50
“Hi-Performance” (up to 150 ln/min)	Accuracy: ± 0.3% of full scale + ± 0.5% of reading* Turndown ratio: 1 : 100
	Pressure controller with external transmitter, special measuring ranges (e.g. 0-20 Pa) & customer-specific solutions on request
PERFORMANCE DATA
Media (real gas calibration)	Air, O2, N2, He, Ar, CO2, H2, CH4, C3H8 (other gases and gas mixtures on request) *O2 & N2 are calibrated with air
Response time Flow Measurement	± 80ms depending on device configuration & according to SEMI standard E17-1011, 5-100% of range under optimized conditions
Response time Pressure Measurement	150ms
Response time Pressure Control	Depending on the measuring section
Repeatability	± 0.2% of full scale (according to SEMI standard E56-0309)
Longterm stability	< 1% of measured value / year
Power supply	24 Vdc (18 – 30 Vdc), 15 Vdc on request
Current consumption Standard	Meter: max. 100 mA; Controller: max. 250 mA (with valve type 8 max. 490mA)
Current consumption Profinet RT / EtherCAT	Meter: max. 125 mA; Controller: max. 340 mA (with valve type 8 max. 560mA)
Temperature (environment/gas)	0 – 50°C
Body Materials	Anodized aluminium, optional stainless steel electropolished 1.4305 or 1.4404
Seals	FKM, EPDM, optional FFKM
Pressure	Vacuum up to 10 bar g
Pressure sensitivity	<0.2% / bar of reading (typical N2)
Temperature sensitivity	0.025% FS measuring range type / °C
Warm-up time	<1 sec. for full accuracy
INTEGRATION
Output signals digital	RS-485; Modbus RTU (Slave); Lab View-VIs available Option: ProfiBus DP-V0, DP-V1 / Profinet RT / EtherCAT
Output signals analog	0..20 mA, 4..20 mA, 0..5 V, 1..5 V, 0..10 V, 2..10 V
Analog setpoints	Realizable with AD-converter (on request)
Process connection	G¼” (BSPP* female) up to 60 ln/min, G½” (BSPP* female) up to 450 ln/min *British Standard Pipe Parallel
Inlet section	None required
Electrical connection	Sub D plug, 9 pole
Mounting orientation	Any position (consult manufacturer above 5 bar or vertical mounting)
SAFETY
Test pressure	16 bara
Leak rate	< 1 x 10-6 mbar l/s He
Ingress protection class	IP50 or IP67
EMC	EN 61326-1

All Dowloads

To top