KEM Flow Measurement
KEM flow meters – precision measurement for liquids, gases, and chemicals. Exclusively distributed in Vietnam by Huynh Bang.
Over 55 years of experience in the field
Flow Measuring Technology and Calibration
With a special focus on quality and precision, we develop and produce reliable flow measurement technology for our customers worldwide. Thanks to our competent and motivated employees, extensive application knowledge as well as a high vertical range of manufacture, we also realize individual customer requirements quickly and flexibly at any time.
KEM
Satisfied customers around the world put their trust in KEM and KEM's reliable measuring solutions.
KEM develop and produce reliable flow measuring technology with a special focus on quality and precision.
Learn more about KEM here.
About KEM
Quality
Part of TASI Group
Milestones
Development & Production
Environment & Sustainability
They Are KEM
KEEN, EXPEXT, MOTIVATED
Since KEM was founded in 1965, they have been helping customers worldwide to continuously optimize their individual processes with the help of their flow measurement technology. In this way, they can work with you to ensure that resources and costs are saved and legal requirements are met.
Since the quality of products depends on reliable measurements, they document the accuracy of our flowmeters in comprehensive calibration protocols and thus guarantee you compliance with standard values.
Top quality to international standards
With a special focus on quality and precision, we develop and produce reliable flow measurement technology for our customers worldwide.
To fulfill this, we are certified according to the following international standards and guidelines and practice them throughout the company:
- ISO 9001 | Quality Management
- ISO 50001 | Energy Management
- ISO 14001 | Environmental Management
- ISO 17025 | accredited test facility
- Atex/IECEx, CSA
- EN ISO 3834-3
- RL 2014/68/EU
- EAC (Russia)
- KGS (Korea)
- ABS (American Bureau of Shipping)
- REACH, RoHS, CMRT
TASI Group
A strong global network with high competence and many years of experience.
KEM is a company of the globally operating TASI Group.
TASI Measurement is a Business Segment of the TASI Group and delivers the most complete portfolio of flow measurement technologies in the world. TASI Measurement has operations and service centers in North America, Europe and Asia that allow us to provide exceptional service and support to our global customers who operate in a wide range of markets.
Our milestones on the way to becoming your competent partner
2025
Introduction of the TCA 1000 transmitter
Maximum efficiency, unsurpassed accuracy - the TCA 1000 sets new standards in flow measurement! With state-of-the-art technology, robust design and first-class performance, it optimizes your processes at the highest level. Rely on precision that makes the difference.
2021
ECO Pulse Amplifiers
Our ECO pulse amplifiers can be equipped with all KEM flow meters. The amplifier system includes a single tap and double tap for higher resolutions or bi-directional flow measurement with standardized push-pull output stage.
2019
Introduction of the new TCM PRO Plus Series.
The mechanical design combined with sophisticated DSP technology is especially designed for applications where requirements for minimum installation dimensions are a decisive criterion. High zero point stability even under changing operating conditions and a fully welded design for use in challenging applications make the sensor concept the ideal flowmeter.
2018
Introducing the new TCD electronics with DSP technology.
With its user-friendly display, the multivariable DSP Coriolis transmitter TCD 9100 can output flow rate, total volume, density or temperature. It offers universal and configurable input and output options, as well as stable signal processing for demanding applications.
2014
Introduction of the TCM high pressure version for H2- applications.
The TRICOR Coriolis high pressure mass flow meter is offered in three pressure ratings: 414 bar [6,000 psi], 690 bar [10,000 psi] and 1050 bar [15,200 psi].
2011
TASI Flow Acquisition of LitreMeter and Vögtlin Instruments.
2009
Construction of the KEM-TASI Flow Production Center Europe in Bad Kötzting (production area: 2,200 sqm).
2005
KEM and AW-Lake Company are the first founding members of TASI Flow within the TASI Group.
KEM is a company of the globally operating TASI Group. The TASI Group combines renowned companies in three business areas: Automation Technology, Testing & Inspection and Flow Measurement Technology.
Since 2005 we were allowed to become part of the business unit TASI Flow Measurement Solutions. This combines the worldwide TASI expertise in the field of flow measurement technology.
2001
First Coriolis mass flow meter in a customer application.
Our TRICOR Coriolis mass flow meters revolutionized flow measurement technology significantly. The absolutely reliable and robust mass flow meters can be optimally adapted to any customer requirements. Direct measurement of mass flow, density and temperature can be performed simultaneously.
1995
First Turbine Flow Meter (HM) in a gas and steam power plant.
In 1995, we were able to further expand our product portfolio. With the introduction of the turbine flow meter, it was also possible to carry out measurements of continuous and discontinuous volume flows. Turbine Flow Meters (HM) are meters that operate on the principle of the Woltmann vane meter. They record the volumetric flow rate in a pipeline through which flow passes via the average flow velocity.
These flow meters are mainly used in applications with lubricating and non-lubricating media.
1994
Certification of the quality management system according to ISO 9001.
We develop, produce and distribute products of the highest quality according to international standards and the requirements of our customers. In order to keep this promise, KEM has since operated a quality management system certified by TÜV Süd according to DIN EN ISO 9001-2015, which includes not only the products themselves, but also our entire process landscape, especially the processes within production.
1994
Accreditation of the calibration laboratory by the German Accreditation Body according to ISO 17025.
We have been performing in-house calibration on our flow meters at the highest technical level since 1994. Thanks to the German Accreditation Body (DAkkS), the laboratory could be accredited by engineers, processes and measuring equipment according to the international standard DIN EN ISO/IEC 17025:2018. The calibration laboratory works with a high-precision load cell system. With accuracies of 0.05 percent for mass and 0.1 percent for volume of flowing liquids, KEM thus occupies a top position worldwide.
Even national testing laboratories use KEM flowmeters calibrated in this way for the worldwide accuracy calibration of their devices abroad.
1992
Market launch of the Helical Flow Meter (SRZ) product line.
In order to expand our product portfolio, we managed to introduce the Spindle Flow Meter product line for highly viscous and abrasive media. Helical Flow Meters (SRZ) are meters that operate on the positive displacement principle. These flow meters are particularly suitable for measuring highly viscous media due to their low pressure drop and low shear.
1970/1971
Start of construction and subsequent opening of the new production site in Bad Kötzting.
Soon the premises were too small. Due to the increasing number of orders, larger and larger quantities had to be produced. Consequently, a new production site was opened in Bad Kötzting. To this day, our employees manufacture the innovative flow meters in this factory building. In addition, our DakkS calibration center, quality assurance, warehouse & logistics, as well as order processing and purchasing are located here.
1965/1971
From the parental garage to a worldwide operating company.
KEM Küppers Elektromechanik was founded by Dipl. Ing. Karl Küppers.
Every company starts small. But if the advantages of innovation and new technologies are used skillfully, the company can grow very fast.
Our history has its origin in a garage in Dachau.
Through long tinkering, he succeeded in developing a precise flowmeter to help people perform accurate measurement tasks.
In 1965, he then founded KEM Küppers Elektromechanik GmbH in Dachau. Over the past decades, we have continued to develop and take on new challenges. As a result, the former family business has been able to grow and rise to become a medium-sized company operating worldwide.
Development & Production
During development, our focus is on the precision of our reliable flow measurement technology. In this way, we not only want to ensure a high quality standard, but also guarantee that individual wishes and suggestions of our customers can be flexibly addressed. Our vertical range of manufacture and the application knowledge of our employees help us to do this, as does the introduction of reliable products and production processes.
Thanks to investments in development, design and manufacturing, we are able to react quickly to these suggestions and deliver high quality - "Made in Germany".
The production of our products requires a combination of specialists in mechatronics and mechanical engineering, electronics, software development and other fields. In doing so, we follow the so-called continuation principle, in which evaluations from our customers, suppliers or other external entities are also taken into account and valued.
Within the scope of our sustainable support and service activities, our in-house accredited calibration laboratory competence enables us to respond to our customers' changing requirements for the measuring instrument used, even years later, and to offer customized solutions.
Environment & Sustainability
KEM is committed to sustainable environmental protection. We put this into practice by ensuring that every KEM employee uses all resources along the value chain carefully and sparingly – even beyond the require-ments of legal regulations. KEM develops, manufactures, and produces its products with the goal of impacting the environment as little as possible and not endangering people.
These efforts are supported by certification to ISO 14001 for environmental management and ISO 50001 for energy management.
